Manx quality problems

bbob · 22-09-2007, 17:30

amroe

I know the justvoip trick and used it myself up to about 6 weeks ago. The problem now seems to be the quality of forward of justvoip. Whenever I forward a call to either a mobile or fixed line and I call my justvoip sip at username@sip.justvoip.com the quality is very bad. I mean really very bad.

www.pbxes.com is a virtual telecom pbx. You can setup trunks = incoming and outgoing lines and you can setup extensions = voip phones or regulas pstn phones. In case of pstn phones extensions the call is forwarded using a trunk.

In my case my mobile number is and extension and incoming calls are forwarded.

When using pbxes pro you can have a callback option.
This means that I call a line on a trunk using a phone with caller id. The callback is setup that it recognises the caller id and when making the call you always get a busy signal.
Within 10-20 seconds you receive a callback on your mobile and you will get the dialtone on the pbx and can continue the call.

Using the system this way, a callback to my mobile cost me 10 eurocent per minute (voicetrading) than I can continue the call at the voicetrading or other betamax provider rate.
To most fixed lines the call is free or just 1 cent. This means I can make a call to a fixed line from my mobile for only 11 cents.

The problem I have is that the manx number I have does not recognise dtmf tones anymore. So whenever I receive the callback and want to dial a number, the numbers are not recognised anymore. This means that using the manx number I can't use my callback system anymore.

	(#1)
bbob (Offline) Senior Member Prepaid Expert Posts: 499 Join Date: 20 Feb 2007 Country:	22-09-2007, 17:30 amroe I know the justvoip trick and used it myself up to about 6 weeks ago. The problem now seems to be the quality of forward of justvoip. Whenever I forward a call to either a mobile or fixed line and I call my justvoip sip at username@sip.justvoip.com the quality is very bad. I mean really very bad. www.pbxes.com is a virtual telecom pbx. You can setup trunks = incoming and outgoing lines and you can setup extensions = voip phones or regulas pstn phones. In case of pstn phones extensions the call is forwarded using a trunk. In my case my mobile number is and extension and incoming calls are forwarded. When using pbxes pro you can have a callback option. This means that I call a line on a trunk using a phone with caller id. The callback is setup that it recognises the caller id and when making the call you always get a busy signal. Within 10-20 seconds you receive a callback on your mobile and you will get the dialtone on the pbx and can continue the call. Using the system this way, a callback to my mobile cost me 10 eurocent per minute (voicetrading) than I can continue the call at the voicetrading or other betamax provider rate. To most fixed lines the call is free or just 1 cent. This means I can make a call to a fixed line from my mobile for only 11 cents. The problem I have is that the manx number I have does not recognise dtmf tones anymore. So whenever I receive the callback and want to dial a number, the numbers are not recognised anymore. This means that using the manx number I can't use my callback system anymore.