Callback solution with pbxes.com and voicetrading.com

bbob · 25-05-2009, 14:33

To use voicetrading you have to setup a trunk first.

goto trunks >add sip truk

give the trunk a name
usename: fill in the number you want as called id four outgoing calls
password: password:username (dont forget the : in the middle)
sip server: sip.voicetrading.com

at the end of the page submit, then press red bar at top of the screen.

Than goto outbound routing to setup an outbound calling route.

Give the route a name
Select the trunk sequence, select the trunkname you created before, press add

Set Destination

you can leave this blank or for example select numbers starting by, fill in 86|xx
This way you have to dial 76 first than 00xxxx. The first 76 will be stripped and not passed on to voicetrading. If you leave it blank you can just dial 00 for an outside line. As I explained before adding a number helps to prevent misuse of webcallback.

You can use another number instead of 76. Please be carefull not to use the same number that you use for an extension. so if you have extensions setup as 10 11 etc dont use 10 or 11.

mingelli · 26-05-2009, 18:09

I have setup everything like you suggested. But where I do get a DID number to call to trigger the callback? Which number is it they provide, a Dutch number? Are you charged to call it to trigger the callback? At moment have a free accoi8nt so need to upgrade it to soho.

	(#1)
bbob (Offline) Senior Member Prepaid Expert Posts: 499 Join Date: 20 Feb 2007 Country:	25-05-2009, 14:33 To use voicetrading you have to setup a trunk first. goto trunks >add sip truk give the trunk a name usename: fill in the number you want as called id four outgoing calls password: password:username (dont forget the : in the middle) sip server: sip.voicetrading.com at the end of the page submit, then press red bar at top of the screen. Than goto outbound routing to setup an outbound calling route. Give the route a name Select the trunk sequence, select the trunkname you created before, press add Set Destination you can leave this blank or for example select numbers starting by, fill in 86\|xx This way you have to dial 76 first than 00xxxx. The first 76 will be stripped and not passed on to voicetrading. If you leave it blank you can just dial 00 for an outside line. As I explained before adding a number helps to prevent misuse of webcallback. You can use another number instead of 76. Please be carefull not to use the same number that you use for an extension. so if you have extensions setup as 10 11 etc dont use 10 or 11.

	(#2)
mingelli (Offline) Senior Member Prepaid Fan Posts: 149 Join Date: 22 Mar 2009 Location: Italy roaming on my yacht Country:	26-05-2009, 18:09 I have setup everything like you suggested. But where I do get a DID number to call to trigger the callback? Which number is it they provide, a Dutch number? Are you charged to call it to trigger the callback? At moment have a free accoi8nt so need to upgrade it to soho.